No.3
3
8
Wheel Truck
(only in K8350 Aircraft kit)
OPTIONAL AT EXTRA COST.
Step-10
Carefully flip the box over while
holding the transit plate or wheel truck in place.
The lettering will now be upright and the ar-
rows will point up. Once this is done, pull the
small flaps from the inside of the box to the
outside.
Step-9
Locate the ground transit
plate. (You may substitute the wheel
truck for the ground transit plate, if you
purchased the K8350 kit.) Place the
wheel truck or ground transit plate at
the front of the bottom of the box so
that the studs go through the holes
into the box. This will connect number
“3” on the wheel truck or ground tran-
sit plate with “3” on the container.
Ground Transit Plate
aircaddy web page 23 04/04/12
No.3
3
