Airbus TPH900 Series, Руководство по установке

Страница: 15 / 52

E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
D
E
U
T
C
H
TPH900 - Installation Handbook
This document and its contents are the property of Airbus DS SAS and must not be copied or circulated without authorisation.
Any usage outside the subject expressly specified is prohibited. Copyright© 2014-2015 - Airbus DS SAS - All rights reserved.
IH - PS11478AQLAE01
10/2015
7/8
INSTALLATION / UNINSTALLATION
Battery pack (Plate A-I)
• Installation
Install the battery pack as follows (see Plate A-I, illustration A):
1) Position the battery pack behind the TPH900.
2) Place the upper part of the battery pack in the box's mechanical adaptation (action

).
3) Push the lower part of the battery back against the box to lock the battery pack (action

).
• Removal
Remove the battery pack as follows (see Plate A-I, illustrations B to D):
1) Hold the TPH900 firmly with one hand, screen downwards, as shown on illustrations B and C,
action

.
2) With the other hand, push the battery pack against the TPH900 box, pressing to compress the box
seal, as shown on illustrations B and C, action

.
3) Use your thumbnail to lift the release button, as shown on illustrations B and C, action

.
4) Now lift the battery pack, as shown on illustration D, action

.
Antenna (Plate A-I)
• Installation
1) Screw the antenna (item 3) into the antenna connector of the TPH900 box (item 2).
2) Slightly tighten the antenna manually up to the point of resistance.

Note: To be operational the TPH900 must be charged, configured and customised using the TPS
(see TPS Operating Manual, reference PS10506 or PS10517 depending on the project).
• Removal
Unscrew the antenna (item 3) from the antenna connector of the TPH900 box (item 2) and remove it.