INTRODUCTION
Overview
Thank you for choosing VertEx as your fume or dust control system. Please read this document before
installation and use.
This document details maintenance activities which are essential to the safe use of your VertEx. We
recommend that the Responsible Person reads this manual fully prior to installation and operation of the
VertEx.
This document refers to the VertEx range. Models of this type are available with a range of filter configurations.
The filter configuration in use is detailed on the system Commissioning Certificate and is used within this
document to provide filter-specific maintenance information.
About VertEx
VertEx is a self-contained cross draught extraction system which utilises a fan and filter combination selected
for your specific application, to extract and filter dust/fumes and return filtered air to the work place.
Some models vary in filtration and filtered air delivery point.
Filters are cleaned by pulsing clean air against the air flow, knocking dust off into the removable bins in the
base of the AirBench
It is used by running the fan at either fixed speed or variable speed (if speed controller fitted) to draw the
pollutant away and through the filters, allowing work or the process to proceed next to the face.
About this Document
This document provides general maintenance and operation instructions for the VertEx range. It should be
read in conjunction with the Commissioning Certificate supplied with the unit. If you have any concerns or
doubts about maintenance or operation of this unit, contact the manufacturer.
© Copyright AirBench Ltd 2016
Page
!
of
!
4
16
