OPERATION
PRINCIPLE OF OPERATION
The MF600 is supplied with:
•
EU4 Pre Filter
•
F8 Bag Filter
•
Centrifugal fan assembly
Air is drawn through the two filters at the inlet and the clean air expelled at the outlet.
CONTROLS
All electrical equipment and controls are located in the electrical enclosure.
1) MAINS ISOLATOR
Power on/off
2) RED LIGHT
Advises filter over-pressure
3) WHITE LIGHT
Power on
FILTER REPLACEMENT
When filter 1 is full it can be emptied. Remove the filter from the housing and either vacuum gently, or tip loose
dust into a skip. Wear appropriate PPE when performing filter maintenance.
Filter 2 must be replaced when full.
LOG BOOK
A log book is supplied with this unit. It should be used to record routine and unplanned maintenance activities
and forms part of your compliance with HSE guidance for LEV systems.
Page
!
of
!
5
7
