Air 486MI Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 44

Air 486MI Скачать руководство пользователя страница 4

CHAPTER 1: INTRODUCTION

The 486MI system board adds to our 486 product line high integration
and   cost   effective   solution   without   compromising   performance   and
quality.  With top speed at 50MHz and integrated 64K/128K/256K Write-
Back cache, the 486MI dramatically boosts system throughput for even
the   most   demanding   applications.     The   486MI   offers   features   and
functionality exceeding any other system board in its class, including:

CPU:

·

Intel i486DX, i486DX2, i486SX, i487SX, P24T, and Overdrives.

Cache Memory:

·

Supports 64K/128K/256K/512K cache memory.

Main Memory:

·

Supports 512Kx36, 1Mx36, 2Mx36, 4Mx36, and 8Mx36 72-pin SIMM
modules.

·

Up to 64 MBytes on-board memory.

Slots:

·

Three 32-bit VESA Local Bus (VL-Bus) slots. All slots support Bus
Master operation.

·

Seven 16-bit ISA bus slots.

IDE Port:

·

Turbo/Normal selections for fast or slow IDE hard drives.

·

Plug and play, replaces any non-intelligent IDE controller without
reformatting the disk drives.

·

Software drivers are not required for all operating systems.

Page 4 486MI System Board User's Manual

«
...
2
3
4
5
6
...
»

Содержание 486MI













































Отзывы:

Нет отзывов