If the unit works for a period of time and then the ozone element(s) become dirty, the
machine may only generate ozone at the "High" point on the ozone level's knob. So when
the knob is turned to about the half way point or below, it may not have any ozone output
because the ozone element is too dirty to generate the ozone. To solve this problem,
please set the knob on "High" and clean the ozone element with the stainless steel
cleaning tool.
There is a small electrostatic 3M “Filtrete" air filter pad on the underside of the generator
to keep dust from entering the unit. When the filter becomes dark or dirty, usually
between one and two months, the user can replace the filter with one of the included
replacement filters. Do not reuse the old filters.
The unit comes supplied with a one year supply of filters.
After that the user may purchase additional replacement filters from Air-Zone Inc.
The outside of the unit can be cleaned with a moist paper towel.
A small vacuum attachment can be used to gently vacuum the dust that accumulates in
the top holes of the unit.
Please be very careful not to poke anything other than the cleaning tool in the top holes
of the unit when cleaning.
High voltages exist and can cause a shock if objects are placed in the top holes of the
unit.
Warranty Information
Every Air-Zone ozone generator is checked to be in perfect working condition before it is
shipped.
The XT-120 and XT-240 ozone generators are under warranty from manufacturing
defects for a period of five years.
Air-Zone will repair or replace the unit at our cost if a defect is determined to be from the
manufacturing process.
This warranty does not cover damage caused by misuse by owner. The ozone elements
are only covered for a period of 6 months. With regular filter changes and cleaning the
elements should last at least three years.
This warranty does not cover replacement filters.
Shipping of the unit for service is the customer’s responsibility.
DO NOT OPEN THE UNIT. There are no user serviceable parts inside. Dangerous high
voltages exist. The warranty is voided if the unit is opened.
Air-Zone is not responsible for any damages caused by the use or misuse of this unit.
Technical Specifications
XT-120
:
Rated Ozone Output Per Hour: Fully variable from 5 mg/hr to 120 mg/hr.
ACTUAL OZONE OUTPUT: 140 mg/hr
(ozone output verified by
SGS
)
Burst Timer: 10, 20, 30, 40, 50, or 60 seconds per minute (continuous)
Generation Method: Corona Discharge, US Patented Xetin ozone
Ozone Air Flow Rate: 3.5 CFM with a quiet precision ball bearing fan
Electrical Source: AC 110V-120V, 60 Hz
