If you desire a lower level of ozone than the lowest setting you can use the “Burst Timer”
which is located on the power cord. The timer’s instructions are below.
If the ozone generator is used to combat cigarette smoke adjust the level of ozone output
for the amount of smokers in the room. If the unit is set on a high level for 10 smokers
and 9 leave the room, the ozone level should be turned down accordingly.
Overuse of ozone is not recommended. If too much ozone is present in the room the
ozone smell can turn from sweet to an obnoxious odor. This should be avoided.
The nose can rapidly loose its ability to smell the ozone.
Ozone at too high a level can cause a headache, burning eyes, or a sore throat.
If this occurs simply turn the ozone control down to a non-objectionable level.
To get the most effective air cleaning from ozone, it is recommended that you use as little
ozone as possible to control odors.
The unit can also be used with a timer to cycle the unit on and off. This can be used to
prevent ozone buildup in the room if the unit’s output is found to be too strong.
Shock Treatments
Please note that the XT-120 and XT-240 ozone generators do not provide sufficient
ozone output to perform a high ozone shock treatment. The ozone levels are not powerful
enough to kill mold and mold spores.
Please contact us for a larger ozone generator if you need a more powerful unit.
Burst Timer
The 120/240 models come with a “burst timer”. This timer allows the unit to cycle on and
off at any ozone level. This is especially useful for air purification purposes.
If the unit is set too strong at the lowest level you can adjust the timer which is located on
the power cord.
The burst timer can be set to these times:
2, 5, 10, 20, 30, 40, 50 and 60 seconds per minute (continuous use).
Maintenance
DO NOT OPEN THE UNIT. There are no user serviceable parts inside. Dangerous high
voltages exist. The warranty is voided if the unit is opened.
Always unplug the unit before cleaning.
The XT-120 and XT-240 ozone generators incorporate a patented method of corona
discharge ozone generation that requires almost no maintenance.
A special steel element cleaning tool has been included with your
unit. It can be used to push any dirt out of the elements. The ozone generator can also be
set to its highest level for 30 minutes to burn off any accumulated dirt buildup.
