Air-Vac PHS1500, Руководство пользователя

Страница: 16 / 24

PHS1500/4000 User’s Guide
1029.00.902 14
To switch positions loosen the locking Knobs on both sides of the preheater. Once loose the Arm Guard
assembly can be raised then rotated rearward. After positioning, tighten the locking knobs to prevent
movement.
Caution: The arm guard should not be leaned on excessively. Its primary function is to help prevent
accidental contact with hot surfaces if it is necessary to reach over the preheater. The operator is still
responsible for being aware of risks of working with hot items and should behave accordingly.
2.1.7 Tip up Carrier
The Carrier is hinged in the back to allow the user to lift the front for placing the under board support on
the preheater surface. If the carrier is lifted far enough, a set of locking arms engage to hold the carrier
up.
Caution: Preheater surfaces and board supports can be extremely hot. Avoid contact and use appropri-
ate tools to handle board supports. A board support handling stick is provided.
To lower the carrier, lift it slightly and press down on the lock arm tabs to disengage the locks.
Caution: When lowering the carrier grasp the inside of the front rail to remain clear of the carrier frame
to avoid any potential pinch areas along the carrier frame.
Carrier in Up and Locked Position (PHS1500 shown)
Support Handling Stick
Lock Arm Tabs
Hold in this area
Caution for pinch along
this area