DRS24 Technical Service Manual
Section 1.0 : Motor Driver Replacement
2
VERIFY DRS24 IS DISCONNECTED FROM THE POWER SOURCE.
Both motor drivers are located in the DRS24 right box (A), (fig.1).
Remove the 10/32” button head screw (B), (fig.1), and swing right box open.
The remaining steps will be performed assuming you are located behind the DRS24.
The top driver (C), (fig. 2), is for your vision cube and the bottom driver (D), (fig. 2), is
for your Z-axis.
Unplug connectors (E), (fig. 2), on the driver you are replacing.
Fig. 1
A
B
1.0 Motor Driver Replacement
1
2
NOTE
☛
STEPS
:
IMPORTANT
!
NOTE
☛
Fig. 2
C
D
E
NOTE
☛
