![Air Techniques ProVecta 3D Prime Скачать руководство пользователя страница 46](http://html1.mh-extra.com/html/air-techniques/provecta-3d-prime/provecta-3d-prime_operating-instructions-manual_2875577046.webp)
42
2210200496L41 1904V004
Usage
10 Maintenance
10.1 Recommended maintenance schedule
Only qualified personnel or personnel trained by Air Techniques is allowed to service the unit�
Prior to working on the device or in case of danger, disconnect it from the mains (e� g� pull the
mains plug)�
WARNING
Risk of infection from contaminated products
Risk of cross contamination
i
Reprocess the product correctly and promptly before its first use and after every subse-
quent use�
Inspection in-
terval
Inspection work
Every 3 years
i
Functional test of the display� Are all symbols displayed?
i
Functional test of the exposure button�
i
Do the various status LEDs light up?
i
Check that the mechanism of the head supports works correctly� Are the
head supports easy to detach and put back on?
i
Functional test of the EMERGENCY OFF button� Is the EMERGENCY OFF
button easy to operate mechanically, and does it light up when pressed?
i
Light barrier test for all light barriers installed in the unit�
i
Visually check the positioning beams� Check the operation of the adjustment
lever for the canine positioning beam�
i
Check the X-ray images for artifacts� If necessary, adjust the collimator and/
or calibrate the sensor�
i
Check the firmware and software versions�
i
Perform a comparative dose measurement based on the requirements from
the acceptance test�
i
Recurring tests and tests after repairs of medical electrical equipment –
DIN EN 62353 (VDE 0751-1)�
Maintenance
interval
Maintenance work
Every 3 years
i
Visually and acoustically check the linear movement on the C-shaped arm� If
necessary, clean the slide rails with alcohol and grease them with Vaseline�
i
Check the operation of the lift motor� Does the unit lift and lower with minimal
noise? If necessary, clean with alcohol and grease with Vaseline�
EN
US
OBJ_DOKU-0000003575-mehrere-005.indd 42
17.04.2019 14:29:04
Содержание ProVecta 3D Prime
