air sniper Spectrum-800, Руководство пользователя

Страница: 9 / 11

9
3. The other end of the power plug should next be plugged into a 110V AC
receptacle. If required an extension cable can be used to extend the distance
from the power receptacle. Please note that the Spectrum-800 is for use with
110V AC only.
4. Turn on the unit using the switch on the front of the unit.
5. Adjust the fan speed to the desired level.
6. Additional programming features can be found in the AC Infinity fan user manual.
BULB STATUS
The Lamp Operating LED will glow three different colors, indicating different bulb status.
The variations are as follows:
- Green: Lamp operating, the lamp is operating as intended
- Yellow: Lamp life warning, the lamp is nearing the end of its lifespan, requires
replacement in near future
- Red: Lamp life exceeded, lamp has reached the end of its lifespan, requires -
immediate replacement
When the Lamp Operating LED color is yellow, please contact your local distributor or
Air Sniper directly for a replacement. The Spectrum-800 is designed to sanitize in an
environment with an airflow of as little as 80 CFM to a maximum of 800 CFM.
FILTER REPLACEMENT
The Air Sniper Spectrum-800 uses a MERV 8 air filter that is sized at 10” by 18” by 1”,
and Air Sniper recommends changing of this once every three (3) months. These filters
can be purchased locally or ordered online.
The Air Sniper Spectrum-800 warranty and performance specifications are only
applicable to users who consistently use a MERV 8 air filter in their Spectrum-800. All
other air filters are not capable of filtering the level of particulates required by the
Spectrum-800.