air sniper Spectrum-800, Руководство пользователя

Страница: 10 / 11

10
TROUBLESHOOTING
If your unit is not operating as expected, there are several steps you can take to attempt
to correct the problem.
WARNING: Do Not attempt to operate the UV-C lamp outside of the unit. UV-C
radiation is extremely harmful to unprotected skin and eyes.
If the Bulb is not operating:
- Inspect the unit and the power cable to verify nothing appears damaged.
- Check that the selected power source is providing power for the unit.
- Check that both ends of the 10’ power cable are securely connected to either the
unit or the power source.
- Check that the On/Off switch is flipped to the on position.
- Once airflow is established, the lamp indicator light will be lit.
If the Lamp Operating LED is Red, the bulb has expired. Contact your local distributor or
Air Sniper to replace the unit.
REPLACING YOUR UNIT
The Air Sniper Spectrum-800 unit uses a built in 300W UV-C lamp with a lifetime of 6+
years (55,200 hours, based on 24/7 operation). To track the life of the lamp on your unit,
check the bulb status LED Color when the unit is activated to determine the state of
your unit. It is strongly recommended that the unit be replaced when the lamp life
warning LED is illuminated (LED glows yellow). When the lamp life has been exceeded
(LED glows red), the entire unit will need to be replaced. Contact your local distributor or
Air Sniper to order replacement units.