Inflating the annex when attached to canopy continued...
Step 8
- After main pump shuts off it has reached the desired pressure. Remember to
turn the main inflation valve in the camper to the horizontal CLOSED position when
inflation is complete. If planning a long stay, close cross linking tubes on annex and
tent to retain pressure, including the cross filling tube. Remember to reopen prior to
Deflation!
Step 9
- Using the black straps provided set the feet of the annex at 8ft. out from the
side of the camper and tension. Ensure all feet are sitting on their protective canvas
bases. Peg feet into ground if weather suggests.
Step 10
- Attach all velcro seals between canopy and annex toshut out wind and seal
room. Zip draft skirt into zipper along side of camper.
INSTALLING YOUR Air OPUS
®
Annex
23
www.opuscamper.us
T ENT INFLA
TION TECHNOLOGY
Fitting the Ensuite Room
1. Using the toggle provided, zip the ensuite top onto the end air beam over
your spare wheel.
2. Peg down each corner/base to tension the room.
3. You may also wish to use the guide ropes provided to retain the shape of the room.
INSTALLING YOUR Air OPUS
®
ENSUITE
www.opuscamper.us
24
T ENT INFLA
TION TECHNOLOGY
IMPORTANT
Remove the ensuite every pack down to prevent
any moisture being trapped inside the camper.
