AHPCO™ Cell Replacement
Step 1
CAUTION: Before attempting to service the Air Oasis unit, be sure the
power is off and unplugged.
DANGER - NEVER LOOK DIRECTLY AT ILLUMINATED AHPCO CELL
1. Remove two (2) screws at the
bottom sides holding outer shell
in place. Then slide the shell up
and off of the internal base.
Step 2
Step 3
3. Grasp the AHPCO
®
Cell and pull
to the side, then remove the lamp
connector.
2. Use a phillips head
screwdriver to remove the screws
from the AHPCO
®
Cell.
CAUTION
UV lamp may be hot and could cause
serious burns if not handled properly.
Please wait until AHPCO
®
Cell has
cooled to room temperature to
remove from unit.
5
WARNING
OPTICAL RADIATION EXPOSURE HAZARD
DO NOT ATTEMPT TO OPERATE UNIT WITHOUT
ALLUMINUM SHELL COVERING AHPCO CELL.
DO NOT ATTEMPT TO REPLACE AHPCO
CELL WITHOUT DISCONNECTING POWER.
PERMANENT EYE AND SKIN DAMAGE MAY RESULT.
