Maintenance and Customer Service
Placement and Operation
Optional Cleaning
If you require any additional information or have problems with your Air Oasis ap-
pliance, you may call Air Oasis customer service at:
1-800-936-1764
Please have your serial and model numbers, found on bottom of unit, handy when
calling.
Save your sales receipt to show if your Air Oasis appliance should ever need any
Off / On
Switch
Base and Honeycomb
- We
recommend wiping with a dry towel to
remove dust and build up.
Aluminum Shell
- We recommend
using stainless steel/aluminum spray
on polish or multi-surface cleaners.
Make sure the polish or cleaner is
recommended for use on aluminum.
Internal
- Take dry cloth and wipe
inside the shell and around the
aluminum brackets and the ballast or
spray with compressed air.
NOTE:
Use compressed air only
to clean AHPCO Cell. Any removal
of catalyst coating will decrease the
effectiveness of your unit and void the
warranty.
Bi-Polar Brush Heads
- The Bi-Polar
brush heads inside your unit should
be cleaned periodically to remove any
debris for optimal effectiveness.
For best results the unit should
be placed in a central location
and three feet or higher from the
ground.
Operation is very simple. Remove
the Air Oasis from the packaging.
Place in desired location, plug it
in and rock the switch to the on
position. The unit can remain in
the on position 24/7.
Upon startup you will hear 3 beeps
signifying the unit has power. After
a brief delay AHPCO
®
Cell will
illuminate and you will see a blue
glow inside the unit.
4
Make sure that the power
cord is unplugged prior
to cleaning.
