manualshive.com logo in svg

Air Monitor VELTRON II, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Air Monitor VELTRON II Скачать руководство пользователя страница 5

VELTRON II

Air Monitor Corporation

116-011-98.P65   (8/30/10)

VELTRON II - IO&M Manual

i

INSTRUMENT WARRANTY

Air Monitor Corporation (hereinafter referred to as “Seller”) warrants that at the time of shipment, products sold pursuant
to this contract will be free from defects in materials and workmanship, and will conform to the specifications furnished
or approved in writing by Seller.  No warranty is given that delivered products will conform to catalog sheets, data
sheets, and the like, which are subject to change without notice.

Seller will repair or replace, at its option, any products listed under this warranty which is returned freight prepaid to
Seller within the earlier of three (3) years after start-up or thirty-nine (39) months after shipment that, upon test and
examination, proves defective within the terms of this warranty.  The warranty period for any item repaired or replaced
shall be for the time remaining on the warranty period of the original components.  Purchaser shall notify Seller in writing
of such defect within sixty (60) days of discovery of the defect.

This warranty does not extend to any product sold by Seller which has been the subject of misuse, neglect, accident,
damage or malfunction caused by interconnection with equipment manufactured by others, improper installation or
storage, or used in violation of instructions furnished by Seller, nor does it extend to any product which has been
repaired or altered by persons not expressly approved by Seller.  Nor does Seller warrant equipment against normal
deterioration due to environment;  nor items such as lamps, glass, and similar items subject to wear or burnout through
usage.  Adjustments for items or equipment not manufactured by Seller shall be made to the extent of any warranty of
the manufacturer or supplier thereof.

Seller shall not be liable for any special or consequential damages or for loss of damage, directly or indirectly arising
from the use of the products.  Seller's warranty shall be limited to replacement of defective equipment and shall not
include field removal and installation expenses.

The warranty set forth above is in lieu of all other warranties either express or implied and constitutes the full extent of
Air Monitor Corporation’s liability to the customer, or any other party for breach of warranty.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS SET FORTH HEREIN AND THERE ARE NO IMPLIED
WARRANTIES OF MERCHANTABILITY OF FITNESS FOR ANY PARTICULAR PURPOSE, WHICH ARE PARTICULARLY
DISCLAIMED.

NOTICE OF PROPRIETARY RIGHTS

This document contains confidential technical data, including
trade secrets and proprietary information which are the sole
property of Air Monitor Corporation.  The use of said data is
solely limited to use as specified herein.  Any other use is strictly
prohibited without the prior written consent of Air Monitor
Corporation.

INSTRUMENT WARRANTY

Содержание VELTRON II








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды