Air Live Ether-GSH2404W Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 54

Air Live Ether-GSH2404W Скачать руководство пользователя страница 14

2. Hardware Description

AirLive Ether-GSH2404W User’s Manual

8

1. Position one bracket to align with the holes on one side of the switch and secure it

with the smaller bracket screws. Then attach the remaining bracket to the other

side of the switch.

2. After attached mounting brackets, position the 24 10/100/1000TX plus 4 Mini

GBIC Web Managed switch in the rack by lining up the holes in the brackets with

the appropriate holes on the rack. Secure the switch to the rack with a screwdriver

and the rack-mounting screws.

[NOTE]

For proper ventilation, allow about at least 4 inches (10 cm) of clearance on

the front and 3.4 inches (8 cm) on the back of the Switch. This is especially important

for enclosed rack installation.

Power On

Connect the power cord to the power socket on the rear panel of the switch. The other

side of power cord connects to the power outlet. The internal power supply of the

switch works with voltage range of AC in the 100-240VAC, frequency 50~60Hz. Check

the power indicator on the front panel to see if power is properly supplied.

«
...
12
13
14
15
16
...
»

Содержание Ether-GSH2404W























































Отзывы:

Нет отзывов