Air Live Ether-GSH2404W Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 54

Air Live Ether-GSH2404W Скачать руководство пользователя страница 13

2. Hardware Description

AirLive Ether-GSH2404W User’s Manual

7

Rear Panel

The 3-pronged power plug is located at the rear Panel of the 24 10/100/1000TX plus 4

Mini GBIC Web Managed Switch as shown in figure. The switch will work with AC in

the range of 100-240V AC, 50-60Hz.

The Rear Panel

of 24 10/100/1000TX plus 4 Mini GBIC Web Managed Switch

Desktop Installation

Set the switch on a sufficiently large flat space with a power outlet nearby. The surface

where you put the switch should be clean, smooth, level and sturdy. Make sure there is

enough clearance around the switch to allow attachment of cables, power cord and

allow air circulation.

Attaching Rubber Pads

A. Make sure mounting surface on the bottom of the switch is grease and dust free.

B. Remove adhesive backing of Rubber Pads.

C. Apply the Rubber Pads to each corner on the bottom of the switch and these

footpads can prevent the switch from shock/vibration.

Rack-mounted Installation

The 24 10/100/1000TX plus 4 Mini GBIC Web Managed Switch come with a

rack-mounted kid and can be mounted in an EIA standard size/19-inch Rack. The

switch can be placed in a wiring closet with other equipment.

Perform the following steps to rack mount the switch:

«
...
11
12
13
14
15
...
»

Содержание Ether-GSH2404W























































Отзывы:

Нет отзывов