Air Lift RideControl 59570, Руководство по установке

Страница: 11 / 24

9
MN-962
4. Set the lower bracket U-bolts (E) under the leaf springs and through the holes in the
lower bracket (fig. 15) and cap with four 3/8” flat washers (J) and 3/8” nylon lock
nuts (I). Torque to finger-tight only at this time.
5. Install the upper air spring hardware by setting the 3/4” serrated lock washer (K)
over the fitting and thread post (fig. 16). Set the 3/4” nylon lock jam nut (L) over the
fitting (with the flat side down) and thread onto the post. Torque to finger-tight only
at this time.
fig. 15
fig. 16
Install U-bolts
under leaf
springs and
through the
holes in the
lower bracket
and cap with
flat washers (J)
and nylon lock
nuts (I). Torque
to finger-tight
only at this
time.
Set 3/4”
serrated flat
washer (K)
over fitting and
thread post on
the air spring.
Thread the
nylon jam nut (L)
onto the thread
post. Torque to
finger-tight only.
J
F
K
L
RideControl