Air Lift QuickShot 25690, Руководство по установке, Страница: 7 / 12

MN-369
5
Apply Thread Sealant to All Threaded Connections
Street Tee
Straight Fitting
Pressure Switch
Female Terminals
To the Fuse Box
To the Compressor
Power Wire
To Air Springs
From the Compressor
Air Line
Air Line
fig. 7
Fig.8 MN 190
Air Line to
Bellows
Star
Washer
Vehicle body
or bumper
Rubber Washer
Flat Washer
fig. 8
100
75
50
25
kg/cm
2
P.S.I.
0
Fig.3 MN 155
PANEL ASSEMBLY
Inflate:
Push Up
Deflate:
Push Down
fig. 4
AIR LINE INSTALLATION
Cut off excess air line squarely, using a sharp knife or Air Line Cutter. Install the
air line into the self locking fitting. Push and slightly turn the cut end of the air line
into the fitting as far as it will go. A definite click can be heard and or felt when the
air line is seated. The air line should go in approximately
9
/
16
”.
�
fig. 6
fig. 5
Air line from
the air tank Air line to
the air springs
Air Line from
the Air Tank
Air Line to
the Air Springs
QuickShot