Air Lift QuickShot 25690, Руководство по установке, Страница: 6 / 12

MN-369
4
Installing the Quick Shot System
Mounting Bolt
Flat Washer
Vehicle Body
Flat Washer
Star Washer
Nut
Ring
Terminal
Compressor
Ground
ir Filter
eader ose
fig. 2
RECOMMENDED COMPRESSOR LOCATIONS
Important
LOCATE COMPRESSOR IN DRY, PROTECTED AREA ON VEHICLE.
DIRECT SPLASH OR EXCESSIVE MOISTURE CAN DAMAGE
THE COMPRESSOR AND CAUSE SYSTEM FAILURE.
Disclaimer: If you choose to mount the compressor outside the vehicle please keep in
mind the compressor body must be shielded from direct splash and the intake should be
snorkeled inside the vehicle. If the compressor does not include a remote mount air filter or
if mounting the compressor outside the vehicle, make sure to orient the compressor intake
filter so that all moisture can easily drain.
Please also remember . . .
• To avoid high heat environments
• To avoid mounting the compressor under the hood.
• To check to be sure the compressor harness #2 will reach the compressor and connect
to harness #1.
• The compressor can be mounted in any position — vertical, upside down, sideways,
etc. (please refer to the instruction manual).
see fig. 3
Install the fitting on the
end of the check valve.
Install the check valve onto the end of the compressor
leader hose. Be sure the arrow on the check valve is
in the direction of flow.
Compressor Leader Hose
fig. 3
QuickShot