Air Lift 88365, Руководство по установке

Страница: 15 / 28

13
MN-944
LoadLifter 5000 Ultimate
6 . Set the right hand unit assembly into position in the same way indexing the lower bracket
with the tabs under the jounce bumper strike plate and, with the exception of using
the slot for the carriage bolt in the lower bracket, install the carriage bolts in the same
manner . Torque both sides of the lower bracket hardware evenly to 31 ft-lbs . making
sure the tabs are still indexed under the jounce bumper strike plate . Figures 26 and 27
show the assemblies bolted into position .
Fittings should be on the outside (tire side) of the assemblies.
7 . Raise the axle back up while aligning the air spring mounting plate’s carriage bolts, with
the frame mounting bracket holes . Cap all carriage bolts, once in position, with 3/8”
serrated lock nuts (N) and torque all the installed nuts to 31 ft-lbs. (fig. 28).
NOTE
fig. 26
fig. 27
fig. 28
Left- hand
assembly
shown .
Right-hand
assembly
shown .
N