2085299A
Rev. H 8/07
2
7
2085299A
Rev. H 8/07
MAINTENANCE
WARNING:
ALWAYS UNPLUG THE CORD BEFORE
MOVING OR SERVICING THE FAN.
CLEANING:
Use a soft cloth moistened with a mild soap solution.
Avoid use of gasoline, benzine, thinner, chlorinated solvents, harsh
cleaners, etc. This will result in damge to the fan.
LUBRICATION:
Precision bearings are sealed at the factory for life
and will not require any further lubrication.
STORAGE:
When not in use, keep unit in a clean, dry place.
WARNING:
TO AVOID THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT USE FAN WITH ANY SOLID STATE SPEED
DEVICE.
1
2
6
7
4
5
3
8
13
12
9
11
10
14
*
= La Asamblea motriz viene completa con Cable, Cambia y Cambia la Perilla
NO.
REF
PARTE
NO.
DESCRIPCIÓN
CANT.
LISTA DE REPUESTOS
NO.
REF
PARTE
NO.
DESCRIPCIÓN
CANT.
1 2096067OR Ornamento 1
2 02096067 Rejilla frontal 1
3 2011903 Paletas 1
4 02091119 Tornillo de tierra #6 x 3/8" PPH 1
5 2011790 Rejilla Trasera 1
6 2091149B Muelle 1
7 2011345 Mordaza inferior 1
8 2011330 Sujete Almohadilla 2
9 2090058 Tornillo #8 x 7/16 PTH 1
10 2011340 El Clip superior 1
11 2011390 El Túnel de Detent 1
12 02030079WG Asamblaje del Motor* 1
13 2030079WGK Interruptor de mando 1
14 2050099W Cordón eléctrico 1
MODEL 6C507D/9145D
MODELO 6C507D/9145D
ASSEMBLY
PACKAGE CONTENTS
Check to see that you have received all of the following parts:
A. Fan Head Assembly
B. Clip Assembly
1. Insert the
Fan Head Assembly
into top of the
Clip Assembly
until
fully seated.
(Figure 1)
2.
WALLMOUNT USE:
Install a Screw (#8 x 3/4" Wood Screw or
equivalent - not supplied) in the wall and hang the Clip Assembly
on the Screw.
(Figure 2)
OPERATION
1. Clip fan to a structure that is between 3/4" and 1 1/8" thick. Clip-
ping the fan to structures with greater or lesser widths may lead
to instability.
2.
SPEED:
Speed is controlled by the three-position rotary switch
located on rear of the motor housing.
0 - OFF
2 - High Speed
1 - Low Speed
3.
ANGLE ADJUSTMENT:
Loosen knob under fan head. Tilt
head to desired air flow position. Retighten knob.
4. POWER SUPPLY CORD: Plug power supply cord into wall outlet
(120V AC, 60 Hz).
Figure 1
Fan Head
Assembly
Clip Assembly
Figure 2
