Weekly Cleaning & Care
WARNING: Before cleaning always turn power OFF and unplug the unit from outlet.
WARNING: DO NOT rinse Base under faucet. To clean, wipe the Base with a soft cloth.
WARNING: DO NOT use any solvents or aggressive cleaning agents. Keep water away from
the Air Outlet. WARNING: DO NOT tamper with the Water Sensor.
NOTE: Recommended to change the water bottle frequently.
Emptying the Base
Remove the water bottle and Top Cover from the Base. Pour the water in the Water
Reservior away from the Air Outlet (a). This will help prevent water from pouring into the
Air Outlet which can cause the unit to malfunction.
Base & Surface Cleaning
Gently wipe with a soft damp cloth (b). WARNING: NEVER scrape the Ultrasonic
Nebulizer with a hard or sharp object.
White Dust Cleaning
If mineral deposits “White Dust” are evident around the Ultrasonic Nebulizer and Water
Sensor, clean these surfaces with a soft cloth and a small amount of undiluted white
vinegar. If necessary, mix a solution of 50% white vinegar and 50% water and fill the Base
with enough solution to cover the Ultrasonic Nebulizer. Allow it to soak for an hour and then
use a cotton swab to gently loosen buildup on the Ultrasonic Nebulizer (c). Put water in the
Base and wipe clean with a soft cloth. WARNING: DO NOT rinse Base under faucet.
Bottle Adaptor Cleaning
Remove the Water Bottle Adaptor from the bottle and rinse thoroughly with tap water (d),
then replace on bottle.
6
a
b
c
d
