AIR GAP Fluidmaster 6000 Series Скачать руководство пользователя страница 1

Страница: 1 / 8

6000 Series AirGap™ Installation Guide

Bottom entry valve assembly

Float adjustment screw

Cap

Anti-siphon vortex generator

Float chamber & locking sleeve

Washer

1/2” or 3/8” BSP threaded shank

Nut

Pre-fitted flow controller and filter

INSTALL WITH CONFIDENCE

Содержание Fluidmaster 6000 Series

Страница 1: ...ation Guide Bottom entry valve assembly Float adjustment screw 1 Cap 2 Anti siphon vortex generator 3 Float chamber locking sleeve 4 Washer 5 1 2 or 3 8 BSP threaded shank 6 Nut 7 Pre fitted flow controller and filter 8 INSTALL WITH CONFIDENCE ...

Страница 2: ...Series AirGap Installation Guide Side entry valve assembly Float adjustment screw 1 Cap 2 Anti siphon vortex generator 3 Float chamber 4 Washer 5 1 2 or 3 8 BSP threaded shank 6 Nut 7 Pre fitted flow controller and filter 8 ...

Страница 4: ... your cistern Drain all water from the cistern and disconnect valve supply pipework Step 3 Remove the old valve from the cistern and ensure the fixing hole area is clean and free of debris or anything which may impair sealing Step 1 Turn off the water supply to the toilet using isolation valve or mains stopcock ...

Страница 5: ... will benefit from the removal of the flow controller and filter Mains water or pumped installations require the filter restrictor to be fitted Note For side entry valve ensure the flow controller and filter is fitted in the orientation as shown Step 5 Check that the sealing washer is pushed fully onto the threaded shank ...