manualshive.com logo in svg

AIR DRYER SUPPLIER CATR-1600-200, Инструкция по эксплуатации

Поделиться
Скачать
AIR DRYER SUPPLIER CATR-1600-200 Скачать руководство пользователя страница 48

Material Safety Data Sheet 

3/16" Activated Alumina Desiccant 

Revision date : 2014/06/19 

Page 6 of 8 

Version: 6.0 

(53732394/SDS_GEN_US/EN) 

Chronic Toxicity/Effects 

Other Information 

The product has not been tested. The statements on toxicology have been derived from the properties of the 
individual components. The product has been assessed on the basis of the components’ available data. To some 
extent data gaps exist for individual components. According to our present knowledge and experience dangers 
which are not covered by the current labeling are not to be expected. 

Symptoms of Exposure 

No significant reaction of the human body to the product known. 

12. Ecological  Information 

Toxicity 

Toxicity to fish 

Information on: Aluminum oxide 
LC50 (96 h) > 218.64 mg/l, Pimephales promelas (Fish test acute, semistatic) 
The product has not been tested. The statement has been derived from substances/products of a similar structure 
or composition. Tested above maximum solubility. 

---------------------------------- 

Aquatic invertebrates 

Information on: Aluminum oxide 
No observed effect concentration (48 h) > 100 mg/l, Daphnia magna (OECD Guideline 202, part 1, static) 
Tested above maximum solubility. The details of the toxic effect relate to the nominal concentration. 

---------------------------------- 

Aquatic plants 

Information on: Aluminum oxide 
No observed effect concentration (72 h) > 100 mg/l (growth rate), Selenastrum capricornutum (OECD Guideline 
201, static) 
Tested above maximum solubility. The details of the toxic effect relate to the nominal concentration. 

---------------------------------- 

Chronic toxicity to fish 

Information on: Aluminum oxide 
EC10 (7 d) 0.0938 mg/l, Pimephales promelas (semistatic) 

---------------------------------- 

Chronic toxicity to aquatic invertebrates 

Information on: Aluminum oxide 
No observed effect concentration (21 d) 0.076 mg/l, Daphnia magna (OECD Guideline 211, semistatic) 
The statement of the toxic effect relates to the analytically determined concentration. The product has not been 
tested. The statement has been derived from substances/products of a similar structure or composition. 

---------------------------------- 

Содержание CATR-1600-200


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды