GDMUBI15-1G
Version 0030
12
5.1.2
Disassembly
Dismantling is carried out in reverse order of the assembling operations. The CORSET
must imperatively be loose (set in the “slow” position) before dismantling.
Before setting the wing flat on the ground,
insert the protective padding on the
keel over the hang point bracket and on the right A-frame strut over the guides of the fine
cord of the CORSET in order to avoid damaging the sail with these jutting parts.
Before folding up the two half-wings
,
place the leather cap on the tensioning
device lever and slip it inside the sail
at the front of the kingpost foot
to avoid tearing
any part of the sail or the frame while closing the leading edges.
Never release the tension of the wing without first removing the tip fins and the
carbon battens of the wing tips.
5.2
Preflight Check
The wing preflight check will be easier if made before lifting the wing above the trike. The
following is a brief summary of the minimum pre-flight inspection, which assumes that the
scheduled maintenance checks outlined in the maintenance manual has been performed. If you
are unsure, it does no harm to increase the number of items in your inspection in accordance with
the recommendations of the maintenance manual.
