Instruction and Maintenance Handbook
a.r.v. TANARG 912
EDITION
:
JUNE 2005
PAGE : 16
AIR CREATION
Aérodrome de Lanas - 07200 AUBENAS - France
Tél. : 33 (0) 4 75 93 66 66 - Fax : 33 (0) 4 75 35 04 03 - Internet : www.aircreation.fr – [email protected]
−
After any heavy landing:
•
Check the front fork, remove and inspect the fork pivot and fork connecting arm–wheel
axis.
•
Check the frame tubes and sheets for distortion and control the under-seat seams.
•
Check the upper beam and the front strut (play, folds and cracks), the engine support
and the engine mounting rubber mounts and springs.
•
Check the rear gear, loosening of assembly devices, and shock absorber air pressure.
If the sail has bumped the ground, even slightly, proceed to a complete
disassembly and a thorough check of the structure, by an authorized
technical station or by the factory workshops.
WARNING:
All the Nylstop
®
nuts must be
replaced
after each
disassembly.
Always
secure such nuts using specific LOCTITE
®
glue.
