5
The station name and IP address that were assigned in the previous steps will now need to be associated to each station in
the system before any call settings can be uploaded. From the top menu bar, select
Tools(T)
from the top menu, then click
Association Settings
.
When the Association Settings window opens, it will automatically begin searching for any IX stations on the network. Once
this is complete, select a configuration in the Station Settings List at the top, then select the station to assign it to in the Station
List. Click
Apply
and
OK
on the pop-up to start the association process for that station, then repeat these steps for the
remaining stations.
Once associated, the stations will restart with the IP address and station name assigned. Scroll down to the Associated Stations
List at the bottom of the page to confirm the status of the association.
If the Station Search fails to
find any stations, verify that
the stations are powered on
anc that the PC is connected
to the same switch.
Association Settings
