4
The IP addresses for the stations can be individually set for each station or they can be configured in a batch. This guide will show how
to assign via the batch configuration. Expand
Network Settings
and click on
IP Address
, then click
Batch IP Address Configuration
Network Settings - IP Address
On the
Batch IP Address Configuration
page, enter a starting IP address and subnet mask. Check the box beside each station or
click
Select
to check all stations at once. Click
OK
, then click
OK
on the confirmation pop-up. Each station will now have an
IP address and Subnet Mask assigned to it.
Batch IP Address Configuration
If a Default Gateway
address is required, it can
be manually added on this
page once the IP addresses
have been assigned.
