3-16
CHAPTER 3. CONVENIENT FUNCTIONS
9. ALL-ZONE PAGING
9.1. Function
Paging calls can be simultaneously made to substations and external public address equipment in the all
programmed zones. (Paging calls are not made to substations and external public address equipment not
assigned to zones.)
[System pre-programming]
(1) The number of digits (1 or 2) of an all-zone paging access number ([0] or [0][0]) can be registered in
system programming.
(2) Substation numbers and selective external public address equipment outputs to be included in each zone
can be registered in the system programming. Up to 1,024 substations and up to 16 selective outputs can
be registered per zone.
9.2. All-Zone Paging Dialing Operation
Step 1.
First dial [ ][8], and then an all-zone paging access number ([0] or [0][0]) followed by [#].
[ ][8][0][#]
(When a single-digit access number is selected)
[ ][8][0][0][#] (When a double-digit access number is selected)
Step 2.
A paging pre-announcement tone is transmitted to all zones.
Place the paging call with the handset either off-hook or on-hook.*
1
Step 3.
To terminate the broadcast, replace the handset or press the [C] key.*
2
*
1
If using a telephone, lift the handset to place a paging call.
*
2
If using a telephone, replace the handset to terminate the paging call.
[Paging Priority order]
Current all-zone paging will be interrupted when the following paging functions are initiated:
1. Emergency paging
2. Emergency conference
3. External source distribution
8
0
#
No. 11
No. 12
No. 13
No. 14
Zone No. 2
No. 19
Zone No. 3
Amplifier
Speaker
Zone No. 1
Amplifier
Speaker
2
1
3
or
C
All zones
DISTRIBUTED BY: www.leedan.com [email protected] Toll-Free: 800-231-1414
