Robot does not work
Robot does not
climb wall
Plug power cord and cable line
Contact local vendor
Contact local vendor
Check the impeller or driving system
Contact a local distributor
ter basket
Replace new roller
Rollers are worn or
consumed too much
Filter basket need to clean
Been blocked
Electric fault
Cleaner does not match
local rated voltage
Damaged during
Power cord not
connected well
The robot pool
cleaner does not go
pool
It just sits at the
and won’t move
1. Did not get the air out of the
machine.
2. The sponge brushes are not
totally soaked.
3. The cleaner is not turned on."
1. Check if the LED on power
because it scheduled for 1 hour
and has completed cleaning. ( The
basket.
3. The belt is broken.
in this case contact with our
customer service for help.
1. Hold the top handle make sure
then the cleaner can immerse
2. Soak the machine into the
water for about 1-2 hour and we
suggest manually knead the
sponge brushes to accelerate the
restart the machine.
3. Replace belts. (Tips: Please
don't use the cleaner immediately
It seems to spend
deep area without
area
formed.
surface to increase the clean
coverage.