7
e
g
a
P
Maintenance
6. Remote On/Off Switch
1. Keep this unit clean and dry. Unplug the unit before cleaning. Clean only the
A
Remote On/Off Switch
can be connected to the
Remote Jack
allowing you to
turn the inverter On or Off from a convenient location when the inverter is installed
in an out-of-reach location. Be sure to have your power inverter and Remote On/Off
Switch properly installed before attempting to turn the unit On(see “Installation”
page 6). Before connecting the remote switch you should ensure the inverter is
turned OFF (O). The
n
plug the remote switch into the jack. The main power switch
of the inverter must be turned ON (I) for the remote switch to function properly.
You may now use the remote switch to turn the inverter ON (I) and OFF (O).
outside of this unit with a soft, dry cloth; never clean this unit with water or
harsh cleaners.
2. The fuses can be replaced by user
.
If you are sure that the fuses are blown,
and you want to replace them, you must turn off the power first, then you should
disconnect the inverter from the batteries. Now you are ready to open the fuse
cover and replace or check the fuses.
3. This device does not contain any other user replaceable parts.If it needs
service,contact your retailer or AIMS Power(see warranty page for details).
Fuses can be replacement by user.
BOTTOM
Fuses(inside)
Indicator Light
