2.3
Remove / install ballistic turrets
To remove / install a ballistic turret:
a
Set the installed turret to setting ”
1
”
(”A” Fig. 3).
b
Push the locking tab in the direction away from the turret.
c
While the locking tab is disengaged, remove / install turret.
NOTE:
Only remove / install ballistic turrets when the locking tab is pointing to
setting "
1
" on the ballistic turret (”A” Fig. 3).
CAUTION:
ALWAYS
perform zeroing if the turret has been changed.
CAUTION:
NEVER
use the sight without ballistic or wind turret installed.
CAUTION: DO NOT
turn the exposed mechanism when the turret has been
removed! ("B" Fig. 3).
Содержание CompM5b
