- 14 -
check the details of this record, then press Soft2 (EDial) again to change the current number.
Pressing Soft2 (Dial) will call this number directly if user don’t modify the number. If there is no
missed call, screen will show “List Is Empty”.
Incoming call
Press
and screen displays “Incoming Call”, by pressing
&
to browse the
records; or press Soft1 (Option) to check the details of this record, then press Soft2 (EDial) again
to change the current number. Pressing Soft2 (Dial) will call this number directly if user don’t
modify the number. If there is no incoming call
,
screen will show “List Is Empty”.
Dialed call
Press
, and use
&
to browse the dialed call records; or press Soft1 (Option)
to check the details of this record, then press Soft2 (EDial) again to change the current number.
Pressing Soft2 (Dial) will call this number directly if user don’t modify the number. If there is no
dialed call, screen will show “List Is Empty”.
3.8. Special keys
SMS function
In the standby press Softkey1-SMS, then press Soft1 (new) key. After inputting SMS content,
press Soft2 (send) key to input callee’s number, next, press Soft2 (OK) again to send SMS.
When user has new message, the phone will ring, there is a coin on the screen. Press
softkey1-SMS, select inbox use up/down key, and then press softkey2-OK. When a number of text
messages, users can use up/down key and press softkey2-Enter to select one to view. Press
softkey2-Reply and input message content, finally, press Soft2(Send) again to reply this message.
The phone can also send messages by phonebook.
Note:
while user browses the message numbers, new messages will be marked by “new”; when
user edits message, press # key that to switch input method, e.g. ABC (uppercase English input),
abc (lowercase English input), 123(digit input), Korean (Korean input(if your phone’s firmware
version supports Korean). PY,( if your phone’s firmware version supports Chinese)
SpeedDial function
User can pre-define numbers in these keys (numeric key 0-9). Hook off, press the defined
numeric key, and then input “#”. Your pre-defined numbers will send out.
Press softkey2-SDial to set speed dial in standby,
a total of 12 numbers, users can select by
memory key. Users can delete and press # key that to switch input method.
Note:
1.
First 9 numbers corresponding digit key 1-9, 10
th
number corresponding digit key 0
2.The first 10 set of numbers in standby mode press the corresponding number key and then
press softkey3-Dial or
【
Speaker
】
key to exhale, but the first 11 groups and 12 group numbers