CHAPTER 5
46
47
MX UTV
This page manages the 4 resettable odometers of MX UTV. The system odometer is
not resettable and is not shown; you will see it in odometers page of Race Studio 3
software (see the chapter about MX UTV and the PC)
Each odometer can be activated/deactivated and/or reset. Select the odometer you
want to manage and press “CHANGE”:
n
to disable select “Status” and press “CHANGE”: status becomes “STOP”
(left image below)
n
to reset the odometer select “Clear” and press “CHANGE” (left image below)
n
pressing “EXIT” you go back to counters page and won’t see the asterisk on the
counter you disabled while the cleared one shows 0 km (in the right image below
both operations have been performed on counter 3).
5.6 Counters
Here you can set the time zone of your MX UTV as well as enable/disable “Daylight
Saving Time”. Time zone is always set manually.
Date and time can be shown in different formats.
Time is automatically synchronized as MX UTV receives the GPS signal.
5.7 Date time
Clears all sessions stored in MX UTV memory: needs confirmation.
5.8 Clear memory
This page shows serial number as well as Firmware and Boot version of your MX UTV.
5.9 System info
MANUALE MX UTV 1.00 2018.qxp_Layout 1 05/04/18 12:00 Pagina 49
