CHAPTER 5
18
19
MX UTV
LED Bar:
manages the central LEDs that can be set as:
n
Laptime
n
RPM
n
OFF
Choosing
Laptime
LEDs will switch on while running showing:
n
gap between current lap time and best lap time (Predictive)
n
gap between current split time and this split time in best lap (Best Section).
Each of the five LEDs indicates a tenth of a second gap; if lighting green they indicate
an improvement while if lighting red they indicate a worsening.
5.3.3 LED setup
Here you can set:
n
the central LEDs bar
(LED Bar)
n
the two lateral LED corresponding to
“1” and “2” screen prints
(Alarm LEDs)
5.3.1 Measure unit
5.3.2 Analog channel setup (Yamaha only)
You can set the unit of measure of:
n
speed: km/h or mph
n
temperature: °C or °F
n
pressure: bar/psi
This icon only appears on vehicle with
Yamaha YXZ 2016 and 2017 ECU and
allows you to set the MX UTV analog
input. It needs an analog sensor to be
connected to MX UTV rear central con-
nector (see MX UTV pinout in “Techni-
cal drawings and specifications”
chapter).
Available options are:
n
NONE
n
oil temperature
n
oil pressure
MANUALE MX UTV 1.00 2018.qxp_Layout 1 05/04/18 12:00 Pagina 21
