Aim ANET42, Руководство пользователя

Страница: 30 / 67

3. Getting started
ANET429-x Users Manual 20
3.3.9 Reset to Factory Settings
Click on the Maintenance tab in the navigation bar (see Figure 3-9 ANET Web
Configuration Tool “Maintenance”).
“Reset To Factory Defaults” allows to reset all settings to the factory defaults.
To do this first go to the Update Tab and re-boot the ANET429 to Maintenance mode by
a mouse click to the “Reset to maintenance system” button. Then wait until the
ANET429 is in Maintenance mode. Log-In again and go back to the Maintenance Tab to
press the OK button on “Reset all settings now”.
After reset, the password will be set to the factory default (“aim”), the Network Settings
will be set to DHCP mode and the services SSH and ANS429 will be enabled.
Figure 3-9
ANET Web Configuration Tool “Maintenance”
3.3.10 Updating the ANET429 module
Click on the “Update” tab in the navigation.
Re-boot the ANET429 to switch to maintenance mode.
Wait until the re-boot has been finished, then log-in (re-connect) to the ANET429 again.
Click again on the “Update” tab in the navigation bar and choose the update-file
(<filename>.tar.gz), e.g. anet429-update.tar.gz and start the update.