Aim AMC429, Справочное руководство

Страница: 207 / 228

Software Library Reference Manual for VME 429 197
Section 10 – Troubleshooting
Error Reporting by ApiIo Function Call - Point 3
At point 3, command status and acknowledgement information is returned by the
Target software to the ApiIo function. If the command status indicates an error, an
error message as shown in Figure 10.1-4 will be displayed:
Figure 10.1-4 _ApiIo Driver Command Status Error
Error detected: _ApiIo() for module:a, biu:b returned API_ERR (cmd = xxxxxxxx,
tg=c, err_msg=d)
Where:
a is the API module number/destination board
b
is the bus interface unit (1 or 2)
xxxxxxxx
is an 8 digit hexadecimal number where the last two digits are
associated with the driver command utilized for the function call (See
Table 10.2-I)
c is the error returned by the Target software
d
is the error returned to the module address (should be the same as c)
If the returned
acknowledgement status is not what the API S/W Library function
indicated to expect from the Target software, an error message as shown in Figure
10.1-5 will be displayed:
Figure 10.1-5 Did Not Get Expected Ack - Acknowledgement Error
Error detected: Did not get expected ACK for module a, biu:b (cmd = xxxxxxxx,
expected c, ret d)
Where:
a is the API module number/destination board
b
is the bus interface unit (1 or 2)
xxxxxxxx
is an 8 digit hexadecimal number where the last two digits are
associated with the driver command utilized for the function call (See
Table 10.2-I)
c is the expected acknowledgement code expected as defined by the library
function call
d
is the returned response code received from the Target software
3