39
Miscellaneous Commands
∗
IDN?
Returns the instrument identification. The exact response is
determined by the instrument configuration and is of the form
<NAME>, <model>, 0, <version><rmt>where <NAME> is the
manufacturer’s name, <MODEL> defines the type of instrument and
<VERSION> is the revision level of the software installed.
ADDRESS?
Returns the bus address of the instrument. The syntax of the
response is <nr1><rmt>.
EER?
Returns the last error number (in <nr1> format) and message and
clears the error register.
∗
RST
Resets the instrument parameters to their default values (see
DEFAULT INSTRUMENT SETTINGS).
∗
RCL <nrf>
Recalls the instrument set up contained in store number <nrf>. Valid
store numbers are 0
−
9. Recalling store 0 sets all parameters to the
default settings (see DEFAULT INSTRUMENT SETTINGS).
∗
SAV <nrf>
Saves the complete instrument set up in the store number <nrf>.
Valid store numbers are 1
−
9.
∗
TRG
This command is the same as pressing the MAN TRIG key. Its effect
will depend on the context in which it is asserted.
BEEPMODE <cpd>
Set beep mode to <ON>, <OFF>, <WARN>, or <ERROR>.
BEEP
Sound one beep.
LOCAL
Returns the instrument to local operation and unlocks the keyboard.
Refer to Calibration section for remote calibration commands.
