AIGOSTAR 8433325185770, Инструкция по эксплуатации

Страница: 4 / 26

SPECIFICATIONS
PARTS NAME
NOTICES
GB GB
03 04
Add the oil into the cutter head before use. (Check the left
picture for reference) The product body may be a little hot
when using or charging. But it will not affect its
performance.
Positions to add oil (one drip to each of the 5 positions)
Always place the unit on a flat surface. Ensure, also,
not to cover the device and not to put anything on it.
•
Incorrect operation and improper use can damage the
appliance and cause injury to the user.
•
This device, designed for home use, complies with
standards relating to this type of product.
•
The item is not to be used, if it has been dropped or if
there are visible signs of damage.
•
This appliance is only intended for household use.
•
Regarding the instructions for cleaning, thanks to refer
to the below paragraph of the manual.
•
This appliance is only intended for household use.
Lithium Rechargeable Ba tt ery Rated Voltage :3.7V
Charging
ti me: 150 minutes
Running ti me: 210 minutes
Capacity: 2000mAh
Adaptor
Appliance
Input:100-240V 50/60Hz
Output: DC 5.0V 1A
Power:3W
Accessory
Brush
Oil
Cu ttin g head
Control knob
Switch
0: O ff
I: Speed 1
II: Speed 2
LED light
Cu ttin g length
silkscreen

Add the oil to the posi ti ons as directed by arrow.

Don’t use petrol, alcohol, thinner to clean the product. Otherwise, the product color
may be changed then.

Use diluted soap water to clean the product.

Don’t charge the product if the room temperature is higher than 40 or lower than 0.

Keep it out of the reach of children to avoid cu ttin g by clipper blade or swallowing its
small parts.