AIGOSTAR 310000HGB, Инструкция по эксплуатации

Страница: 9 / 27

MAINTAINING THE APPLIANCE
Cleaning soleplate: Clean with a 100% cotton cloth if starch
or other residues accumulate after iron is unplugged and
cool.
Warning: Do not immerse in liquids or use abrasive
cleansers, scouring pads or vinegar to clean the soleplate.
This will damage the finish.
Self-clean function:
Use the self-clean function once a
month to maintain optimal iron performance.
1. Turn off the iron.
2. Turn the Steam knob back and forth to remove debris and
minerals from Steam Valve. This keeps water flowing into
the steam chamber.
3. Fill water tank with tap water to MAX line.
4. Plug in iron, set Temperature knob to Linen and heat for 2
minutes.
5. Unplug iron. Holding iron over a sink in a horizontal
position, press Self-clean button and hold. Water will
begin dripping from the steam vents. Slowly rock iron side
to side and front to back for 30 seconds. Dip nose of the
iron slightly below the rear to circulate water. Release
Self-clean button after one minute.
6. Open fill cap and empty remaining water. Carefully dry
soleplate with a towel.
7. Plug in iron and set Temperature knob to Linen and heat
for 2 minutes to dry out completely. Set the temperature
knob to Off, unplug the iron, and allow it to cool down.
CLEANING AND STORAGE