1. The spray function can be used in any temperature, either
in dry or steam ironing, as long as the water tank is filled
with water.
2. Firmly press the spray button for this function
Note
: This button has to be pressed repetitively to start this
function for the first time.
SHOT OF STEAM
Shot of steam provides an extra burst of steam for deep
penetration of stubborn wrinkles. You can use this feature
while Dry or Steam ironing.
1. P
lace the temperature knob at the “max” position and wait
until the indicator light goes out.
2. Place the iron on top of the wrinkle and press the Shot of
Steam button each time you would like an extra burst of
steam.
3. Wait for a few seconds for the steam to penetrate the fiber
before pressing again.
Note:
The Shot of Steam function may be used continuously
in approximately 3-second intervals.
ANTI-DRIP
With the anti-drip system, you can perfectly iron even the
most delicate fabrics.
Always iron these fabrics at low temperatures. The plate may
cool down to the point where no more steam comes out, but
the drops of boiling water can leave marks or stains. In these
cases, the Anti-drip system automatically activates to prevent
vaporization, so that you can iron the most delicate fabrics
without risk of spoiling or staining them.
Содержание 310000HGB
Страница 4: ...PART FIGURE 17...
Страница 27: ......