AIEMERY EFD, Руководство пользователя

Страница: 8 / 21

7
be regulated correctly.
When regulating the working height, loosen the screw (1), remove the screws (2) on both
sides; regulate the roller height (see following drawing); fix the parts on the set position.
The lowest hole is the highest working height; put the screws (2) into the set hole; tighten
screw (1) and screws (2).
3.3 Regulating the Tension of Driving Belt
ATTENTION: The machine shall always stand still for regulating the
tension.
Remove the driving belt
cover.
Loosen screws 1. 2. 3. 4.
Tighten the driving belt
with screw 5.
Tighten the screws 1. 2.
3. 4.
Put back the driving belt
cover.
The recommended moving forward speed is 1.5
km/h, according to the grass height, thickness
and working condition.
The driving belts are tightened by hand at the
regulating point B up to the correct tension.
Tighten all screws after regulating.
The driving belts shall be replaced when they are
not in a good condition.