2
Ver 1 01/2015
INTRODUCTION
This Bed Lever is for use with slatted beds and can be fitted to single,
double, queen and king size beds. Not for use on divan beds, please
use VY438 for divan beds.
The Bed Lever is not designed to prevent users falling from their bed.
This device is suitable for adult use only, it is not suitable for use with
children.
BEFORE USE
• Carefully remove all packaging. Avoid using any knives or other sharp
instruments as this may damage the surface of the product.
• Check that all parts are present before assembly (see fig. 1). If any
parts are missing do not attempt assembly and contact your supplier.
• Check the product for any visible damage If you see any damage or
suspect a fault, do not use your product as it may compromise your
safety, but contact your supplier for support.
ASSEMBLY INSTRUCTIONS
1. Lay piece C on a flat surface and slide piece A onto the tubes on piece C and push firmly until the
holes align (see fig 2).
2. Secure with E-Clips (B). Make sure the E-clips are secure before proceeding (see fig. 3)
fig. 1
fig. 2
fig. 3
NB. This equipment must be installed by a competent person and
a risk assessment undertaken as to the suitability of the Bed
Lever for the particular user and user’s bed. We would refer
customers to ‘Bed Rail Risk Management’ LAC Number 79/8
published by the HSE.
VY428S/VY428SA
160 kg (25 st.) weight limit
Note: Do not exceed the weight limit stated – doing so could
put the user at risk.
