aidapt 5021196708728, Инструкции по использованию и обслуживанию

Страница: 2 / 16

Usage and Maintenance Instructions Ver. 1 07/2013 (2666)
2
INTRODUCTION
Thank you for deciding to purchase the Head to Toe Cover for Wheelchair Users
from Aidapt. This product is manufactured from the finest materials available.
When used correctly it is designed to give many years of reliable, trouble-free
service.
NB. This equipment must be installed by a competent person.
BEFORE USE
•
Carefully remove all packaging. Avoid using any knives or other sharp
instruments as this may damage the item.
•
Check the product for any visible damage If you see any damage or
suspect a fault, do not use your product, but contact your supplier for
support.
INTENDED USE
The Wheelchair Cover provides head to toe protection from the elements. It can be
put on or taken off with ease and features a snug fitting hood ensuring top to toe
protection.
FITTING INSTRUCTIONS
The Wheelchair Cover can easily be slipped on and off then adjusted as necessary:
•
Unzip the neck opening fully
•
Put the Wheelchair Cover on over the head and shoulders, like a
jumper/sweater, and also over the back of the wheelchair
•
Make sure pushing handles protrude through the rear slots, if applicable
•
Pull the Wheelchair Cover down over the torso and legs and fit the
elasticated base over the footplate of the wheelchair
•
The neck opening can be zipped up or down as desired and the hood can
be raised and tied for complete weather protection