Usage and Maintenance Instructions
Ver. 2 07/2012 (2171)
2
INTRODUCTION
Thank you for deciding to purchase the Egg Cups from Aidapt. The Egg Cups are
manufactured from the finest materials available. When used correctly it is
designed to give many years of reliable, trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
These useful Egg Cups have a secure, non-slip suction base to grip a hard, flat
surface such as a table, trolley or lap tray and are ideal for those with the use of only
one hand, assisting independent dining.
INSTRUCTIONS FOR USE
•
Ensure that the surface on which you will be positioning the Egg Cup is
clean and dry.
•
Position the Egg Cup as desired then press down to secure it to the surface
with the built-in non-slip suction base.
•
To remove the plate break the suction by raising one edge slightly and
lifting the suction base, then twist the base to fully release the suction and
lift it free from the surface.
NB. If the Egg Cups are not empty, care must be taken when removing them
from the surface to avoid spillage.
CLEANING
Clean your Egg Cup using a non-abrasive cleaner or mild detergent with a soft
cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may damage the
product beyond repair and should not be used. Always ensure that you rinse then
wipe dry the equipment after cleaning.
The Egg Cup can also be cleaned on the top tray of a domestic dishwasher on a
standard/eco or cool program.
