Aicon Air DAC3050, Инструкция по эксплуатации

Страница: 16 / 18

DAC3050
16
CONNECTING THE PNEUMATIC SYSTEM
An example of connecting a pneumatic system:
1. Pneumatic compressor
2. Filter / water extractor
3. Pressure regulator
4. Oil distributor
5. Pneumatic hose
6. Tool
Use an oil distributor in the pneumatic system in order to ensure the effectiveness and long life
span of the pneumatic appliance.
Only use oil that is suitable for pneumatic appliances and
check the oil quantity in the oil distributor daily. NOTE: When the pneumatic network’s length
exceeds 10 m the output of the oil distributor is not necessary enough to lubricate the
pneumatic appliances effectively enough. In this case, ensure sufficient lubrication according to
the point “lubrication”.
The pneumatic filter/water extractor must be used to remove liquid and dirt, to prevent rust,
damages and wear of the machine inner parts. The filter must be checked daily and emptied
when needed.
The machine, connectors and hoses must be protected against dirt. Coarse dust, sand etc. can
cause leaks and damage the machine and its connectors.
ENVIRONMENTAL PROTECTION
When disposing of the product’s packaging, observe the local instructions given for garbage
disposal and recycling, depending on the material.
WARRANTY
The warranty period of the product is 12 months from the date of purchase.
The importer is responsible for the replacement of the damaged machine or machine parts
caused by defects in material and manufacturing workmanship, if they are found to be defective
in a control.
When submitting a warranty claim the purchaser has to present the receipt, purchase invoice,
warranty certificate or delivery note. The product must be returned complete and it must be
equipped with a defect report.
The product warranty is void if the machine has been opened, the machine parts have been
changed, the machine has been repaired or its structure has been modified. The warranty is not
valid in professional use or when the machine has been leased.
The warranty does not cover damages that are caused by normal wear, misuse or abuse. The
warranty does not cover the shipment, damaged caused during the shipment or any indirect
costs.
Only the maintenance service authorized by the importer can perform the warranty repairs.
All rights for changes are reserved.
Importer / Manufacturer:
Veljekset Keskinen Oy
Onnentie 7, 63610 Tuuri, FINLAND.
Tel. +358 10 770 7000