Aicon Air DAC1511, Инструкция по эксплуатации

Страница: 10 / 14

DAC1511
10
TECHNICAL INFORMATION
Product code DAC1511 (ST64)
Weight (without clamps) 2,7 kg
Compressed air connector
1/4” NPT
Maximum operational pressure allowed 8 bar
Recommended pressure zone for operation 5,5-8 bar
Pneumatic Expenditure 6.2 bar
Nail 2.2mm
Nail Length 25-64 mm
Capacity 80 pcs
Noise values
Noise Pressure Level LpA, 1s = 88dBA
Noise Intensity Level LpA, 1s = 95 dBA
Temporary Noise Pressure LpA, 1s = 82 dBA
SAFETY INSTRUCTIONS
The non-compliance with these safety instructions can cause serious
accidents or death.

Read and understand these instructions before using this tool.

Only instructed persons can operate a pneumatic nailer.

Never operate a pneumatic device before you have read carefully all its
operating and safety instructions.

Keep your workplace organised and clean, and make sure that it is well
illuminated.

Remain alert while you execute your work, never use the nailer under
the influence of drugs, alcohol or other medications.

Keep children and animals away from the working environment.

The nailer can recoil in case a nail happens to hit some hard material
whilst shooting, such as steel, for example; the nail also can twist and
make its way towards the operator.

The nailer should be kept tightly fastened and kept firmly against the
target.

Do not modify the operation or application purpose of the machine.

Never use the nailer in event of fire or if there is risk of explosion.

Do not use oxygen or explosive gases as
the nailer’s propulsion.

Make sure that no trigger is pressed when the nailer is connected to the
pneumatic network.

Do not leave the nailer connected to the pneumatic network during
transportation and when it is not in use.

Only use the hand grip when carrying the nailer, do not keep any finger
on the trigger.

Do not use no-return valves which leave the pressure inside the nailer.

Never use gasoline or other inflammable liquids to clean the tool. The
steam inside the machine can cause an explosion.

The noise level produced by the nailer exceeds 85 dB.

When operating the nailer, approved ear protection, protective glasses
and, if needed, a protective helmet, safety footwear and other protective
accessories should be worn at all times.

Do not stretch out whilst working, always stand on a leveled and steady
surface.

Never place your hand or other body part in the shooting area when
plugging/ unplugging the machine into/from the pneumatic network.

Never direct the nailer towards yourself or others around you.

To avoid accidents, stop immediately the machine operation should any
malfunction occur.