6
temperature is the temperature you have setting. After water heated up to the temperature you
have selected, the KEEP WARM button red light flash, indicating that kettle has enter the keep
warm state, corresponding water temperature indicator stay on. As the keep warm time is
30mins, after 30mins, the kettle will automatically shut off, then all indicators light off.
Note: if kettle is to boil water in 100
°
C setting
，
after heat up to this temperature, kettle will
default turn to 90
°
C to keep warm(so the 100
°
C temperature indicator lights off, the 90
°
C
indicator lights on,the yellow indicator light in water lights on). The keep warm time is 30mins.
3.2.5 Under keep warm mode, if press the KEEP WARM button again, the keep warm mode
will be canceled. Meanwhile, the KEEP WARM indicator light lights off. But indicator light in
water will keep no change, and enter the 3 program.
3.2.6 Press the START button in kettle power on state, the kettle will shut off, if press START
button again, kettle will turn on again, and all setting will be reset.
3.2.7 Kettle has memory function, stand back kettle on base within 90s after it has left, kettle
will hold the keep warm state(no need to reset the program).
Boil-dry protection
Should you accidentally allow the kettle to operate without water, the boil-dry protection will
automatically switch it off. If this should occur, allow the kettle to cool before filling with cold
water and re-boiling.
Care and cleaning
Always disconnect the appliance from the power outlet and leave it to cool down completely
before cleaning.
Never immerse the kettle or cord in water, or allow moisture to contact with these parts.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior to discolor .To remove this build-up,
use non-toxic Liquid Descaler.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar and the remainder of water and be allowed to
stand overnight.
Do not boil.
